C Series Oil Resistance and Hydrolysis Resistance Polycarbonate-based TPU

I-C Series Resistance and Hydrolysis Resistance Polycarbonate-based TPU Isithombe Esifakiwe

incazelo emfushane:

I-Miracll isetshenziswa embonini yezimoto, futhi ithole isitifiketi se-IATF16949 emkhakheni wezimoto.Ngenxa yamazinga aphezulu enkampani ye-R&D kanye namaqembu okukhiqiza, i-Mirathane TPU inganikeza ozakwethu amandla aqinile aqinile, ukumelana nokugqokwa okuphezulu, ukumelana nesimo sezulu, ukumelana nomjikelezo wokushisa okuphakeme nokuphansi, ukuguquguquka okuphansi, izinto ezibambezela ilangabi ezingenalo halogen.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izici

Ukumelana Nokuguga Okuhle Kakhulu, Ukumelana Kawoyela, Ukumelana ne-Hydrolysis, Ukumelana Nokushisa Okuphezulu, Ukumelana ne-UV, Izakhiwo Zomzimba Ezinhle Kakhulu & Ukumelana Nesimo Sezulu.

Isicelo

I-Hose&Tube, Ifilimu&Sheet, Ipayipi Lomlilo, Ipayipi Lay-Flat le-Shale Oil Frac, Ithangi likawoyela, njll.

Izakhiwo	Okujwayelekile	Iyunithi	C80	C85	C90	C95
Ukuminyana	I-ASTM D792	g/cm³	1. 15	1. 15	1. 15	1. 15
Ukuqina	I-ASTM D2240	I-Shore A/D	82/-	85/-	90/-	95/-
Amandla Okuqina	I-ASTM D412	I-MPa	25	30	35	45
100% Modulus	I-ASTM D412	I-MPa	7	8	12	20
300% Modulus	I-ASTM D412	I-MPa	14	20	30	40
Elongation at Break	I-ASTM D412	％	550	500	400	350
Izinyembezi Amandla	I-ASTM D624	kN/m	90	120	140	180
I-DIN Ukulahleka Kwe-Abrasion	I-DIN 53516	mm3	25	25	25	25
Tg	I-DSC	℃	-30	-20	-15	-8

QAPHELA: Amanani angenhla akhonjiswa njengamanani ajwayelekile futhi akufanele asetshenziswe njengokucaciswa.

Umhlahlandlela Wokucubungula

Ukuze uthole imiphumela emihle, ukomiswa kwangaphambilini komkhiqizo phakathi namahora angu-3-4 ngezinga lokushisa elinikeziwe ku-TDS.
Imikhiqizo ingasetshenziselwa ukubumba umjovo noma ukukhipha, futhi sicela uhlole imininingwane eyengeziwe ku-TDS.

Umhlahlandlela Wokucubungula Wokubumba Umjovo		Umhlahlandlela Wokucubungula we-Extrusion
Into	Ipharamitha	Into	Ipharamitha
Umbhobho(℃)	Inikezwe ku-TDS	Ukufa(℃)	Inikezwe ku-TDS
I-Metering Zone(℃)		I-adaptha(℃)
Indawo Yokucindezela (℃)		I-Metering Zone (℃)
Indawo yokudla(℃)		Indawo Yokucindezela (℃)
Ingcindezi yomjovo(ibha)		Indawo yokudla (℃)