E * U Series Ezigbo nghọta na UV Nguzogide TPU
Atụmatụ
Ngosipụta mara mma na nguzogide UV, ezigbo nhazi, ezigbo nguzogide mbata, ezigbo agba, dabara maka Electroplating, mbipụta, mkpuchi na teknụzụ nhazi nke abụọ ndị ọzọ.
Ngwa
Mkpuchi ekwentị&pad, Watch Band, akpụkpọ ụkwụ, wdg
| Njirimara | Ọkọlọtọ | Nkeji | E85U | E90U | E190LU | E95U |
| Njupụta | ASTM D792 | g/cm3 | 1.18 | 1.18 | 1.19 | 1.18 |
| Isi ike | ASTM D2240 | Oke A/D | 88/- | 92/- | 92/- | 95/- |
| Ike ọdụdọ | ASTM D412 | MPa | 38 | 40 | 40 | 42 |
| 100% modulu | ASTM D412 | MPa | 8 | 10 | 10 | 12 |
| 300% modulu | ASTM D412 | MPa | 18 | 24 | 20 | 28 |
| Elongation na ezumike | ASTM D412 | ％ | 500 | 450 | 500 | 400 |
| Ike akwa | ASTM D624 | kN/m | 110 | 125 | 140 | 145 |
| Nguzogide na-acha odo odo | ASTM D1148 | Ọkwa | 4 | 4 | 3.5 | 4 |
| Tg | DSC | ℃ | -22 | -20 | -25 | -18 |
IHE: E gosipụtara ụkpụrụ ndị dị n'elu dị ka ụkpụrụ na-ahụkarị na ekwesighi iji ya dị ka nkọwapụta.
Ntuziaka nhazi
Maka nsonaazụ kacha mma, ihicha ngwaahịa mbụ n'ime awa 3-4 na okpomọkụ enyere na TDS.
Enwere ike iji ngwaahịa a maka ịkpụzi injection ma ọ bụ extrusion, ma biko lelee nkọwa ndị ọzọ na TDS.
| Ntuziaka nhazi maka ịkpụzi injection | Ntuziaka nhazi maka extrusion | |||
| Ihe | Oke | Ihe | Oke | |
| Nozzle(℃) | Enyere na TDS | anwụ(℃) | Enyere na TDS | |
| Mpaghara mita (℃) | Ihe nkwụnye (℃) | |||
| Mpaghara mkpakọ (℃) | Mpaghara mita (℃) | |||
| Mpaghara nri (℃) | Mpaghara mkpakọ (℃) | |||
| Nrụgide injection( mmanya) | Mpaghara nri (℃) | |||
Nyocha
A na-enyocha ngwaahịa niile nke ọma n'oge mmepụta na mgbe emechara.Enwere ike ịnye akwụkwọ nyocha (COA) yana ngwaahịa ndị a.
Ajụjụ: Ị nwere ike ịnye ihe atụ?
A: Anyị nwere ike ịnye ihe atụ.Biko kpọtụrụ anyị maka samples
Ajụjụ: Kedu ọdụ ụgbọ mmiri ị nwere ike ibunye ibu ahụ?
A: Qingdao ma ọ bụ Shanghai.