Taxanaha E*U Hufnaan heersare ah iyo iska caabin UV TPU
Astaamaha
Daah-furnaan heersare ah iyo iska caabin UV, Habayn Wanaagsan, Iska caabin Socdaalka Wanaagsan, Midabaynta Wanaagsan, Ku habboon Electroplating, Daabacaadda, Dahaarka iyo tignoolajiyada kale ee habaynta sare
Codsiga
Daboolka taleefanka & suufka, Kooxda Ilaalada, Kabaha, iwm
| Guryaha | Heerka | Unug | E85U | E90U | E190LU | E95U |
| Cufnaanta | ASTM D792 | g/cm3 | 1.18 | 1.18 | 1.19 | 1.18 |
| Adag | ASTM D2240 | Xeebta A/D | 88/- | 92/- | 92/- | 95/- |
| Xoogga Jilicsan | ASTM D412 | MPa | 38 | 40 | 40 | 42 |
| 100% Modul | ASTM D412 | MPa | 8 | 10 | 10 | 12 |
| 300% Modul | ASTM D412 | MPa | 18 | 24 | 20 | 28 |
| Kordhinta xilliga Nasashada | ASTM D412 | ％ | 500 | 450 | 500 | 400 |
| Xoogga Ilmo | ASTM D624 | kN/m | 110 | 125 | 140 | 145 |
| iska caabin huruud ah | ASTM D1148 | Darajo | 4 | 4 | 3.5 | 4 |
| Tg | DSC | ℃ | -22 | -20 | -25 | -18 |
FIIRO GAAR AH: Qiimaha sare waxaa lagu muujiyay qiyamka caadiga ah mana aha in loo isticmaalo qeexid ahaan.
Hagaha habaynta
Natiijooyinka ugu wanaagsan, qalajinta hore ee alaabta inta lagu jiro saacadaha 3-4 ee heerkulka la bixiyay ee TDS.
Alaabooyinka waxaa loo isticmaali karaa qaabaynta cirbadeynta ama extrusion, fadlan ka hubi tafaasiil dheeraad ah TDS.
| Hagaha habaynta ee qaabaynta duritaanka | Hagaha habaynta ee ka saarista | |||
| Shayga | Halbeegga | Shayga | Halbeegga | |
| Nozzle(℃) | Lagu siiyay TDS | Dhimasho(℃) | Lagu siiyay TDS | |
| Aagga Qiyaasta (℃) | Adapter(℃) | |||
| Aagga cadaadiska (℃) | Aagga Qiyaasta (℃) | |||
| Aagga Quudinta(℃) | Aagga cadaadiska (℃) | |||
| Cadaadiska Durida (baarka) | Aagga Quudinta (℃) | |||
Kormeer
Dhammaan alaabooyinka si fiican ayaa loo kormeeraa inta lagu jiro wax soo saarka iyo ka dib wax soo saarka.Shahaadada Falanqaynta (COA) ayaa lala bixin karaa alaabada.
S: Ma bixin kartaa muunado?
J: Waxaan bixin karnaa muunado.Fadlan nala soo xiriir si aad muunado
S: Dekeddee ka keeni kartaa shixnadda?
J: Qingdao ama Shanghai.