G Series-Esingqongileyo-friendly TPU Bio-Based
Iimbonakalo
I-Bio-Based (25% -70% ngokwe-ASTM-D6866), i-Environmental-friendly, i-Fast Setting Time, i-Elasticity egqwesileyo
Isicelo
Izihlangu, i-Electronics, i-Automotive, iMidlalo noLonwabo, ukhathalelo lwezonyango, ukugqithisela, iFilimu & nePhepha, ukuHlanganisa kunye nesilungisi, njl.
| Iipropati | Umgangatho | Iyunithi | G185 | G190 | G195 | G155D | G370 | G375 | G685 | G690 | G70 | G75 | G80 | G85 | G90 | G95 |
| Ukuxinana | I-ASTM D792 | g/cm3 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 | 1. 2 |
| Ukuqina | I-ASTM D2240 | Unxweme A/D | 85/- | 90/ | 94/- | -/55 | 72/- | 77/- | 86/- | 91/- | 70/- | 75/- | 80/- | 85/- | 90/- | 95/- |
| Tensile strength | I-ASTM D412 | MPa | 32 | 36 | 40 | 40 | 20 | 25 | 26 | 30 | 20 | 25 | 30 | 33 | 35 | 36 |
| 100%Imodyuli | I-ASTM D412 | MPa | 5 | 8 | 15 | 15 | 2 | 3 | 7 | 9 | 3 | 4 | 6 | 7 | 8 | 9 |
| 300%Imodyuli | I-ASTM D412 | MPa | 15 | 22 | 30 | 31 | 4 | 6 | 12 | 16 | 5 | 6 | 10 | 11 | 12 | 15 |
| Ukwandiswa ngexesha lekhefu | I-ASTM D412 | ％ | 550 | 450 | 390 | 350 | 700 | 650 | 550 | 500 | 650 | 600 | 550 | 500 | 500 | 500 |
| Iinyembezi Amandla | I-ASTM D624 | kN/m | 90 | 120 | 145 | 160 | 50 | 75 | 100 | 115 | 70 | 80 | 95 | 100 | 115 | 120 |
| Tg | DSC | ℃ | -30 | -28 | -25 | -20 | -43 | -42 | -25 | -22 | -35 | -30 | -25 | -23 | -20 | -20 |
| Umxholo osekelwe kwi-Bio | I-ASTM D6866 | ％ | 41 | 37 | 33 | 28 | 30 | 28 | 21 | 20 | 75 | 67 | 65 | 60 | 54 | 50 |
QAPHELA: La maxabiso angentla aboniswa njengamaxabiso aqhelekileyo kwaye akufunekanga asetyenziswe njengengcaciso.
IsiKhokelo sokuSebenza
Ukufumana iziphumo ezilungileyo, ukomiswa kwangaphambili kwemveliso ngexesha le-3-4 iiyure kwiqondo lokushisa elinikeziweyo kwi-TDS.
Iimveliso zingasetyenziselwa ukubumba inaliti okanye i-extrusion, kwaye nceda ujonge iinkcukacha ezininzi kwi-TDS.
| Isikhokelo sokuLungiselela ukuBunjwa kwesitofu | Isikhokelo sokuLungiselela i-Extrusion | |||
| Into | Ipharamitha | Into | Ipharamitha | |
| Umbhobho(℃) | Inikwe kwi-TDS | Ukufa(℃) | Inikwe kwi-TDS | |
| uMmandla wokulinganisa(℃) | Iadaptha(℃) | |||
| Indawo yoxinzelelo(℃) | uMmandla wokulinganisa (℃) | |||
| Indawo yokutya(℃) | Indawo yokuNxinzelela (℃) | |||
| Uxinzelelo lokutofa (ibha) | Indawo yokutya (℃) | |||
Ukupakishwa
25KG/bag, 1250KG/pallet okanye 1500KG/pallet, ipallet eyenziwe ngomthi
Ukuphatha kunye noGcino
Kuphephe ukusetyenzwa kwezixhobo ezingaphezulu kwamaqondo obushushu acetyiswayo.
Ukungena komoya okufanelekileyo jikelele kufuneka kwanele kwiimeko ezininzi.Qwalasela ukusetyenziswa kwendawo yokuphuma komoya yokukhupha umoya kwiindawo zokusetyenzwa.
1. Kuphephe ukuphefumla umsi wokulungiswa kwe-thermal kunye nomphunga
2. Izixhobo zokuphatha oomatshini zinokubangela ukubunjwa kothuli.Kuphephe ukuphefumla uthuli.
3. Sebenzisa iindlela ezifanelekileyo zokumisa xa uphethe le mveliso ukuphepha iintlawulo ze-electrostatic
4. Iipellets emgangathweni zingatyibilika kwaye zibangele ukuwa
Iingcebiso zokugcina: Ukugcina umgangatho wemveliso, gcina imveliso kwindawo epholileyo, eyomileyo.Gcina kwisitya esivaliweyo.
Ulwazi lwe-HSE: Nceda uthathe i-MSDS njengereferensi.
Umbuzo: Ngaba ungabonelela ngeesampuli?
A: Singabonelela ngeesampuli.Nceda uqhagamshelane nathi ngeesampuli
Umbuzo: Leliphi izibuko onokuhambisa imithwalo?
A: Qingdao okanye Shanghai.
Umbuzo: Kuthekani ngexesha lokuhamba?
A: Kudla ngokuba ziintsuku ezingama-30.Kwamanye amabakala aqhelekileyo, sinokwenza ukuhanjiswa ngokukhawuleza.
Umbuzo: Kuthekani ngentlawulo?
A: Kufuneka intlawulo kwangaphambili.