E1 Series Excellent Abrasion Resistance Polyester-based TPU
Iimbonakalo
Ukuxhathisa okugqwesileyo kwe-Abrasion, ukuxhathisa kwe-oyile/kweMichiza, ukuSebenza okuLungileyo kokuZimela, ukuxhathisa koxinzelelo oluphezulu, iiPropati eziBalaseleyo zoomatshini.
Isicelo
Ukubhinca, iHose&Tube, iTywina&Gasket, ukuDityaniswa, ucingo kunye neCable, iMoto, izihlangu, iCaster, iFilimu, ukubumba ngaphezulu, njl.
| Iipropati | Umgangatho | Iyunithi | E175 | E180 | E185 | E190 | E195 | E155D | E165D | E175D | ||
| Ukuxinana | I-ASTM D792 | g/cm3 | 1. 18 | 1. 19 | 1. 19 | 1. 19 | 1. 2 | 1. 21 | 1. 21 | 1. 22 | ||
| Ukuqina | I-ASTM D2240 | Unxweme A/D | 74/- | 82/- | 86/- | 92/- | 95/- | -/55 | -/65 | -/75 | ||
| Tensile strength | I-ASTM D412 | MPa | 22 | 35 | 40 | 45 | 50 | 52 | 55 | 60 | ||
| 100%Imodyuli | I-ASTM D412 | MPa | 3 | 5 | 7 | 10 | 15 | 16 | 22 | 35 | ||
| 300%Imodyuli | I-ASTM D412 | MPa | 7 | 12 | 15 | 24 | 35 | 38 | 40 | 43 | ||
| Ukwandiswa ngexesha lekhefu | I-ASTM D412 | ％ | 600 | 550 | 500 | 450 | 400 | 380 | 350 | 300 | ||
| Iinyembezi Amandla | I-ASTM D624 | kN/m | 75 | 100 | 120 | 140 | 160 | 180 | 200 | 240 | ||
| Ilahleko ye-DIN ye-Abrasion | DIN 53516 | mm3 | / | 30 | 30 | 35 | 35 | 35 | 35 | 40 | ||
| Tg | DSC | ℃ | -42 | -40 | -37 | -32 | -30 | -26 | -22 | -15 | ||
| Iseti yoxinzelelo | iiyure ezingama-22 @ 70℃ | I-ASTMD395 | ％ | / | 18 | 21 | 24 | 25 | 28 | 30 | 32 | |
| iiyure ezingama-24@100℃ | I-ASTMD395 | ％ | / | 28 | 30 | 33 | 35 | 36 | 38 | 40 | ||
QAPHELA: La maxabiso angentla aboniswa njengamaxabiso aqhelekileyo kwaye akufunekanga asetyenziswe njengengcaciso.
IsiKhokelo sokuSebenza
Ukufumana iziphumo ezilungileyo, ukomiswa kwangaphambili kwemveliso ngexesha le-3-4 iiyure kwiqondo lokushisa elinikeziweyo kwi-TDS.
Iimveliso zingasetyenziselwa ukubumba inaliti okanye i-extrusion, kwaye nceda ujonge iinkcukacha ezininzi kwi-TDS.
| Isikhokelo sokuLungiselela ukuBunjwa kwesitofu | Isikhokelo sokuLungiselela i-Extrusion | |||
| Into | Ipharamitha | Into | Ipharamitha | |
| Umbhobho(℃) | Inikwe kwi-TDS | Ukufa(℃) | Inikwe kwi-TDS | |
| uMmandla wokulinganisa(℃) | Iadaptha(℃) | |||
| Indawo yoxinzelelo(℃) | uMmandla wokulinganisa (℃) | |||
| Indawo yokutya(℃) | Indawo yokuNxinzelela (℃) | |||
| Uxinzelelo lokutofa (ibha) | Indawo yokutya (℃) | |||
Ukuhlolwa
Zonke iimveliso zihlolwe kakuhle ngexesha lemveliso nasemva kwemveliso.Isatifikethi soHlalutyo (COA) sinokunikezelwa kunye neemveliso.
Iziqinisekiso
Sinezatifikethi ezipheleleyo, ezifana ne-ISO 9001, ISO 14001, ISO 45001, IATF 16949, iLabhoratri yeSizwe yeCNAS
Umbuzo: Ngaba ungabonelela ngeesampuli?
A: Singabonelela ngeesampuli.Nceda uqhagamshelane nathi ngeesampuli
Umbuzo: Leliphi izibuko onokuhambisa imithwalo?
A: Qingdao okanye Shanghai.
Umbuzo: Kuthekani ngexesha lokuhamba?
A: Kudla ngokuba ziintsuku ezingama-30.Kwamanye amabakala aqhelekileyo, sinokwenza ukuhanjiswa ngokukhawuleza.
Umbuzo: Kuthekani ngentlawulo?
A: Kufuneka intlawulo kwangaphambili.